D2HS DIAMOND ROCK SAWS FOR EXCAVATORS

For excavators 1 - 8 tonnes

Designed with the concrete cutting and demolition industies in mind, the high speed saws offer exceptional performance.

They utilise a wide range of blade diameters, and can be set for a variety of excavator and robot sizes.

The D2HS has the option of through-hub water distribution, which Echidna has developed to improve cutting rates and blade life, while limiting water consumption and mess to a minimum.

D2HS Series Features

Automatic Blade Brake	✔
Reversible Blade Spin Direction	✔
Through-hub Water Distribution	✔
Case drain required	✔
Minimum Trench Width	15 inch
Cutting Depth Loss	4 inch

imperial

Model
Saw Model		D2HS/XM	D2HS/NM
Excavator range	tonnes	3 - 5	3 - 6
Blade Diameter Range	inch	20 - 42	20 - 48
Mass (drive unit)	lb	176	176
Performance
Torque Max	lbf. -ft.	133	184
Speed Max	rpm	2670	1900
Power Max	hp	67	67

Recommended Flow Rates

Rock Saw Model	Diamond Blade diameter /inch
Rock Saw Model	20	24	28	30	32	36	42
	Recommended Flow Rate (gpm
D2HS/XM	16 - 29	13 - 24	11 - 21	11 - 19	10 - 18	9 - 16
D2HS/NM	22 - 32	18 - 32	16 - 29	15 - 27	14 - 25	12 - 22	11 - 19
Recommended flow rate for each saw varies depending on the material to be cut. The table above indicates the working range of the saw with the diamond and wood saw blades having the diameters indicated. This table does not apply to other blade types. Contact your supplier for more specific recommendations for the material that you want to cut.